Solutions
Multi-brand PLC programming and integration
We program, migrate and integrate PLCs and RTUs from Allen-Bradley, Siemens, GE Fanuc, Schneider Modicon, ABB and Bristol. We document the logic so maintenance staff can understand and sustain it.
In detail
Many plants run controllers from several brands and several eras. What matters is not the brand but that the logic is organized, commented and tested, and that every unit reports to the same supervisory system.
We have programmed MicroLogix PLCs with PanelView screens on test separators, GE Fanuc 90-70 PLCs on injection pumps and PLCs on each FWKO integrated into a DCS. In western Venezuela we migrated controllers from four manufacturers and developed their supervisory applications in PLC and HMI. We also design and build the panels and integrate MCCs, soft starters and drives.
What’s included
- Control panel design and assembly
- PLC and RTU configuration and programming
- Logic migration between platforms
- Control logic documentation
- Integration of MCCs, soft starters and variable speed drives
- Local HMIs (GE, Allen-Bradley, Siemens, Schneider)
- Startup and post-startup assistance
Platforms and manufacturers we work with









How we do it
- 1
Control philosophy
What the process must do, with which permissives and alarms.
- 2
Programming
Organized, commented logic on the customer’s platform.
- 3
Testing
Shop tests and field loop checks.
- 4
Handover
Documentation and support after startup.
Projects where we did it
See all projects
Western Venezuela
Automation infrastructure optimization
Siemens, Schneider, Allen-Bradley, GE Fanuc

Monagas, Venezuela
Well test separator automation
MicroLogix, PanelView 700, Allen-Bradley

Monagas, Venezuela
Free water knockouts and heater treaters
CIMPLICITY, GE Fanuc

Tucupita, Venezuela
1200 HP water injection pumps
GE Fanuc 90-70, CIMPLICITY
In the field and in the control room



Frequently asked questions
Can you work on logic written by another integrator?
Yes. We start by backing up and documenting the existing logic before changing anything.
Do you hand over documented logic?
Yes. Control logic documentation is part of the service.
Related topics
- DCS migration and controller modernizationNew DCS installation and migration of Siemens, Schneider, Allen-Bradley and GE Fanuc controllers: consoles, servers, graphics, alarms and historians.
- Well test separator automationNEMA 4X panel with MicroLogix PLC and PanelView 700, transmitters, control valves, UPS and radio for test separators. Commissioning and startup.
- Water injection pump automationControl of 1200 HP water injection pumps with a GE 90-70 PLC: flow, pressure, temperature, vibration, ESD, soft starter and DCS graphics.
Services involved
Have a similar project or fault?
Tell us what system you run and what you need. We will reply with a scope proposal.
Request a quote